Planet Networking & Communication WSGW-24020 User Manual page 114

Indicates if IGMP snooping is enabled on the VLAN.
IGMP Status
Indicates if Auto Learn is enabled on the device. If Auto Learn is enabled, the
Auto Learn
device automatically learns where other Multicast groups are located.
Enables or disables Auto Learn on the Ethernet device.
Indicates the amount of time host waits to receive a message before timing out.
Host Timeout
The default time is 260 seconds.
Indicates the amount of the time the Multicast router waits to receive a message
MRouter Timeout
before it times out.
The default value is 300 seconds.
Indicates the time the host waits, after requesting to leave the IGMP group and not
Leave Timeout
receiving a Join message from another station, before timing out. If a Leave
Timeout occurs, the switch notifies the Multicast device to stop sending traffic. The
Leave Timeout value is either user-defined, or an immediate leave value.
The default timeout is 10 seconds.
IGMP Snooping can be enabled only if Bridge Multicast Filtering is enabled.
Notice:
User's Manual of WGSW-24020/WGSW-48040
-11