Login Authentication - Planet Networking & Communication WSGW-24020 User Manual

Default Configuration
If the default list is not set, only the enable password is checked. This has the same effect as the command aaa authentication
enable default enable.
On the console, the enable password is used if it exists. If no password is set, the process still succeeds. This has the same
effect as using the command aaa authentication enable default enable none.
Command Mode
Global Configuration mode
User Guidelines
The default and optional list names created with the aaa authentication enable command are used with the enable
authentication command.
Create a list by entering the aaa authentication enable list-name method command where list-name is any character string
used to name this list. The method argument identifies the list of methods that the authentication algorithm tries, in the given
sequence.
The additional methods of authentication are used only if the previous method returns an error, not if it fails. To ensure that the
authentication succeeds even if all methods return an error, specify none as the final method in the command line.
All aaa authentication enable default requests sent by the router to a RADIUS server include the username
"$enabx$.", where x is the requested privilege level.
Example
The following example sets authentication when accessing higher privilege levels.
console (config) # aaa authentication enable default enable

5.3.3 login authentication

The login authentication line configuration command specifies the login authentication method list for a remote telnet or console.
To return to the default specified by the authentication login command, use the no form of this command.
Syntax
login authentication {default | list-name}
no login authentication
default — Uses the default list created with the authentication login command.
list-name — Uses the indicated list created with the authentication login command.
Default Configuration
Uses the default set with the command authentication login.
Command Mode
Line Configuration mode
User's Manual of WGSW-24020/WGSW-48040
-15