Show Version; Syslog Commands; Logging On - Planet Networking & Communication WSGW-24020 User Manual

15 59
20 68
25 77
30 86
35 95
40 104

5.23.10 show version

The show version user EXEC command displays the system version information.
Syntax
show version
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays a system version (this version number is only for demonstration purposes).
Console> show version
SW version x.x.x.xx (date xx-xxx-xxxx time 17:34:19)
Boot version x.x.x.xx (date xx-xxx-xxxx time 11:48:21)
HW version x.x.x

5.24 Syslog Commands

5.24.1 logging on

The logging on global configuration command controls error messages logging. This command sends debug or error
messages to a logging process, which logs messages to designated locations asynchronously to the process that generated the
messages. To disable the logging process, use the no form of this command.
User's Manual of WGSW-24020/WGSW-48040
-31