Qos Commands; Qos; Show Qos - Planet Networking & Communication WSGW-24020 User Manual

User's Manual of WGSW-24020/WGSW-48040

5.17 QoS Commands

5.17.1 qos

The qos global configuration command enables quality of service (QoS) on the device and enters QoS basic or advanced mode.
Use the no form of this command to disable the QoS features on the device.
Syntax
qos [advanced]
no qos
advanced — QoS advanced mode, which enables the full range of QoS configuration.
Default Configuration
By default QoS is enabled in basic mode.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command. However, switching to Basic qos mode sets the trust mode to cos.
Example
The following example shows how QoS is enabled on the device, in basic mode.
Console (config)# qos

5.17.2 show qos

The show qos user EXEC command displays the QoS status.
Syntax
show qos
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays a device where basic mode is supported.
-24