Tacacs-Server Source-Ip - Planet Networking & Communication WSGW-24020 User Manual

timeout — Specifies the timeout value in seconds. (Range: 1 - 1000)
Default Configuration
5 seconds
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example sets the timeout value as 300.
Console (config)# tacacs-server timeout 300

5.25.4 tacacs-server source-ip

The tacacs-server source-ip command in global configuration mode specifies the source IP address that will be used for the
communication with TACACS servers. To return to default, use the no form of this command.
Syntax
tacacs-server source-ip source
no tacacs-server-ip
source — Specifies the source IP address. An out-of-band IP address can be specified as described in the usage
guidelines.(Range: Valid IP Address)
Default Configuration
The IP address would be of the outgoing IP interface.
User Guidelines
To define an out-of-band IP address use the out-of-band IP address format: oob/ip-address.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example specifies the source IP address.
Console (config)# tacacs-server source-ip 172.16.8.1
User's Manual of WGSW-24020/WGSW-48040
-32