User's Manual of WGSW-24020/WGSW-48040
appears as follow:
Figure 4-12 Switch per Link Aggregation screen
4.3.3 LACP
Aggregated Links can be manually setup or automatically established on the relevant links by enabling Link Aggregation Control
Protocol (LACP). Aggregate ports can be linked into link-aggregation port-groups. Each group is comprised of ports with the
same speed, set to full-duplex operation, the LACP screen contains fields for configuring LACP LAGs (see figure 4-13).
Figure 4-13 Switch LACP configuration screen
The page contains the following fields:
-40-