Planet Networking & Communication WSGW-24020 User Manual page 83

The Page contains the following fields:
CoS Mode
Class of Service
Queue
The Restore Defaults button restores the device factory defaults for mapping CoS values to a forwarding queue.
Figure 4-37 CoS Settings screen
This indicates if QoS is enabled on the interface. The possible values are:
• Disable, disables QoS on the interface.
• Basic, enables QoS on the interface.
• Advanced, enables the Advanced Mode QoS on the interface.
Specifies the CoS priority tag values, where zero is the lowest and 7 is the highest
Defines the traffic forwarding queue to which the CoS priority is mapped.
Four traffic priority queues are supported.
-83-
User's Manual of WGSW-24020/WGSW-48040