Bridge Multicast Forward-All - Planet Networking & Communication WSGW-24020 User Manual

Syntax
bridge multicast forbidden forward-unregistered {add | remove} {ethernet interface-list | port-channel portchannel-
number-list }
no bridge multicast forbidden forward-unregistered
add — Forbid forwarding unregistered multicast packets.
remove — Don't forbid forwarding unregistered multicast packets.
interface-list — Separate nonconsecutive Ethernet ports with a comma and no spaces; use a hyphen to designate a
range of ports. (Range: Valid Ethernet port)
port-channel-number-list — Separate nonconsecutive port-channels with a comma and no spaces; use a hyphen to
designate a range of port-channels. (Range: Valid Port-channel number)
Default Configuration
Not forbidden
Command Modes
Interface configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Examples
This example forbids port 1 to be a Forwarding-unregistered-multicast-addresses port within VLAN 8.
console (config)# interface vlan 8
console (config-if)# bridge multicast forward-unregistered add ethernet 1

5.4.7 bridge multicast forward-all

The bridge multicast forward-all interface configuration command enables forwarding of all multicast packets on a port. To
restore the default, use the no form of the bridge multicast forward-all command.
Syntax
bridge multicast forward-all {add | remove} {ethernet interface-list | port-channel port-channel-number-list}
no bridge multicast forward-all
add — Adds ports to the group.
remove — Removes ports from the group.
interface-list — Separate non consecutive valid Ethernet ports with a comma and no spaces; a hyphen is used to
designate a range of ports.
User's Manual of WGSW-24020/WGSW-48040
-16