Performing "Scan To Hdd - Sharp MX-C382SC Operation Manual

PERFORMING "Scan to HDD"

1
(4) (2)
COPY IMAGE SEND
Press [Start] to scan original.
Original exit place: Upper Exit
File Retrieve Scan to HDD
File
Original
Information
Exposure
Resolution
2
Comp. Ratio
Colour Mode
Special Modes
Preview
If the original is 2-sided, be sure to touch the [Original] key and then touch the [2-Sided Booklet] key or the [2-Sided
Tablet] key as appropriate for the original.
Press the [COLOUR START] key or the [BLACK & WHITE START] key .
Scanning begins.
When Preview is enabled, the preview screen appears.
☞
Checking the image before storing it (Preview)
3
For the procedure for placing the original, see step 4 of
A beep will sound to indicate that Scan to HDD is completed.
To cancel scanning...
Press the [STOP] key (
(1) (3)
DOCUMENT
FILING
HDD Status Ex Data Access
Auto
Store:
Scan: A4
Auto
200X200dpi
Medium
Auto Mono2
(page 6-22)
).
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
Placing the original on the document glass
Portrait original
Landscape original
c b
Switch to document filing mode and
select Scan to HDD settings.
(1) Touch the [DOCUMENT FILING] key.
(2) Touch the [Scan to HDD] tab.
If you do not wish to select settings, go to the next step.
(3) Select the original size, exposure,
resolution, compression ratio, colour mode,
and special modes.
See ""Scan to HDD"
(4) Touch the [File Information] key.
The settings are the same as for "File". See
INFORMATION" (page 6-15).
"SAVING A FILE WITH "Quick
6-23
DOCUMENT FILING
Align the top edge of the
original against the side of
the document glass with
the scale.
Align the right side of the
original against the side of
the document glass with
a
the scale.
SCREEN" (page 6-18).
"FILE
File"" (page 6-11).
Contents