Scanning Settings (Original Size, Exposure, Resolution And File Format); Storing, Deleting, And Using Original Sizes - Sharp MX-M350U Operation Manual

SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION AND FILE FORMAT)

Touch the [OK] key.
4
OK
A4
AB
A4R
INCH
B4
5 Touch the [OK] key.
SEND SIZE
OK
00%
AUTO
2-SIDED
TABLET

STORING, DELETING, AND USING ORIGINAL SIZES

Up to 9 special original sizes can be stored. Stored sizes can be easily called up and are not erased if the power is
turned off. Storing a frequently used original size saves you the trouble of manually setting the size each time you
fax that size of document.
● To cancel an original size storing, using, or deleting operation, press the [CA] key or touch the [ORIGINAL] key on
the screen.
■ Storing or deleting an original size
1 Touch the [ORIGINAL] key.
300 x 300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
AUTO A4
ORIGINAL
2 Touch the key under [SCAN SIZE].
SCAN SIZE
100%
AUTO A4
2-SIDED
2-S
BOOKLET
TAB
3 Touch the [CUSTOM SIZE] key.
A5R
MANUAL
B5
B5R
CUSTOM
SIZE
STANDARD SI
The specified original
size is displayed as the
scan size.
You will return to the
initial screen.
2-16
The selected size appears in the top half of
6
the [ORIGINAL] key.
300 x 300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
A4
ORIGINAL
NOTE
You can return to automatic detection by pressing
the [CA] key.
4 Touch the [STORE/DELETE] key.
RECALL STORE/DELETE
5 Touch the original size key (
you wish to store or delete.
X68 Y78
RECALL STORE/DELETE
stored size, touch the key that shows the size that you
wish to delete or change.
●If you are storing an original size, go to step 6.
●If you are deleting an original size, go to step 8.
●If you are changing an original size, go to step 8
and touch the [AMEND] key.
) that
To store an original size,
touch a key that does not
show a size ( ).
Keys that already have an
original size stored will show
the stored size ( )
X68 Y78
To delete or change a