Specifying The Original Scan Size And Send Size - Sharp MX-C382SC Operation Manual

Hide thumbs Also See for MX-C382SC:

Table of Contents

SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE

When the original is placed, the original size and the send size set in the system settings appear in the base screen as

the original size and send size.

In the above screen, the scan size (the original size) is A4 (8-1/2" x 11") and the send size is auto. For example, if the

scan size is A4 (8-1/2" x 11") and the send size is B5 (5-1/2" x 8-1/2"), the image will be reduced before transmission.

If the size of the placed original is different from the displayed original size, specify the original size.

Specifying the original scan size (by paper size)

Specifying the original scan size (by numerical values)

• System Settings (Administrator): Default Original Size Settings

Set this if you frequently use a particular original size. The set size will appear in the [Original] key.

When this setting is configured, changing the original size can be omitted.

• System settings (Administrator): Setting of Default Original Exit Place

When the automatic document feeder is used, the original's default output destination can be set to the upper exit or the

heavy exit. (Except when "Size Input" or "Card Size" is selected for the original size.)

Internet Fax

Address Book

Address Entry

Send Settings

Address Review

Special Modes

"Send Size" is set

(5-1/2" x 8-1/2")

A4 (8-1/2" x 11")

USB Mem. Scan

Auto/Greyscale

Transmission

The image is reduced

to B5 (5-1/2" x 8-1/2")

before transmission

SCANNER/INTERNET FAX

Table of Contents