Enlarge/Reduce The Printed Image - Sharp AJ-6110 Online Manual

Hide thumbs Also See for AJ-6110:
Table of Contents

Advertisement

Enlarge/Reduce the Printed Image

You can enlarge or reduce the size of your document from 25% to 400% in 1% increments.
To use this function, open the printer driver setup screen, select the "Scaling" tab, and type a percentage, or click
the arrows in the "Zoom" box to change the setting.
Reference:
See the
"Scaling" Tab Settings
Automatic Zooming to the Loaded Paper
This printer driver can adjust the zoom ratio for printing according to the paper loaded in the printer.
Follow the steps shown below to use this function. The instruction below assumes that you intend to print an A4 size
document onto an A6 size paper.
1 1 1 1
Click the "Scaling" tab in the printer driver setup
screen.
2 2 2 2
Check the "Fit to Page" box.
Make sure that the paper size shown in the "Source Size" box
corresponds to the document size.
If the paper size shown in the "Source Size" box does
not correspond to the document size, change the
"Paper Size" setting to match the document size.
for details on "Zoom" option.
3 3 3 3
A4 size document (Source Size)
Select the paper size for "Target Size", which
corresponds to the size of paper in the printer.
Now, the printed image will automatically fit the paper set in
the printer.
Source Size: A4
Target Size: A6
A6 size paper (Target Size)
Print
30

Advertisement

Table of Contents
loading

Table of Contents