Overview Of Network Setup And Configuration - Fuji Xerox DocuPrint M218 fw User Manual

Overview of Network Setup and Configuration

To set up and configure the network:
1
Connect the printer to the network using the recommended hardware and cables.
2
Turn on the printer and the computer.
3
Print the System Settings page and keep it for referencing network settings.
4
Install the driver software on the computer from the Software Pack CD-ROM. For information on
driver installation, see the section in this chapter for the specific operating system you are using.
5
Configure the printer's TCP/IP address, which is required to identify the printer on the network.
®
• Microsoft Windows
automatically set the printer's Internet Protocol (IP) address if you connect the printer to an
established TCP/IP network. You can also manually set the printer's IP address on the
operator panel.
®
• Mac OS X systems: Manually set the printer's TCP/IP address on the operator panel.
6
Print a System Settings page to verify the new settings.
NOTE:
• The reports and lists are all printed in English.
• If the Software Pack CD-ROM is not available, you can download the latest driver from our web site:
http://www.fujixeroxprinters.com/
See also:
• "Printing a System Settings Page" on page 188
®
operating systems: Run the Installer on the Software Pack CD-ROM to
Printer Connection and Software Installation 66