Configuration Of Scan To My Folder; Step 1 Preparations; Step 2 Enabling Smb Port And Setting Up Tcp/Ip - Fuji Xerox ApeosPort-V 4020 Administrator's Manual

Configuration of Scan to My Folder

This section describes how to configure the machine to use the Scan to My Folder service.
The following shows the reference section for each procedure.

Step 1 Preparations .....................................................................................................................................................................295

Step 2 Enabling SMB Port and Setting up TCP/IP................................................................................................................295

Step 3 Configuring Remote Authentication ..........................................................................................................................296
Step 4 Configuring Scan to My Folder ....................................................................................................................................297
Step 5 Configuration on the Computer ..................................................................................................................................299
Step 1 Preparations
The Scan to My Folder service allows you to forward scanned files to recipients which vary
depending on a login user when [Login to Remote Accounts] is selected for [Login Type].
The following items are required to use the Scan to My Folder feature.
Remote Authentication System
To use the Scan to My Folder service, a remote authentication system is required.
For more information about a remote authentication system, refer to "Authentication System" (P.160).
Destination Computer
The following operation system must be installed on a destination computer.
For Mac OS X, a sharing user account is required on the Mac OS X.
Microsoft Windows 2000
Microsoft Windows Server 2003
Microsoft Windows Server 2008
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2012
Microsoft Windows Server 2012 R2
Microsoft Windows Vista
Microsoft Windows 7
Microsoft Windows 8
Microsoft Windows 8.1
Mac OS X 10.4.11 Tiger
Mac OS X 10.5 Leopard
Mac OS X 10.6 Snow Leopard
Mac OS X 10.7 Lion
OS X 10.8 Mountain Lion
Step 2 Enabling SMB Port and Setting up TCP/IP
To use Scan to My Folder service, enable the SMB port and set the IP address. The following
describes the configuration procedures on the machine.

Configuration of Scan to My Folder

9
295