File Name Conflict; (Setting Procedures Only When A File Name Is Overlapped); Document Name (Specifying A Filename To Save To) - Fuji Xerox DocuCentre 9000 User Manual

File Name Conflict

(Setting procedures only when a file name is overlapped)

You can set the procedure when file name is overlapped in the same mailbox specified.
1
Select [File Name Conflict].
2
Select any item.
Cancel Job (No save)
If a file of the same name already exists in the forwarding destination, the job is
cancelled and the file is not saved.
Change Name and Save
If a file of the same name already exists in the forwarding destination, the file name is
automatically changed and the file is saved. A 4-digit number (0001 - 9999) is
automatically added to the end of the file name.
Overwrite Name and Save
The existing file is replaced with the new one and saved.

Document Name (Specifying a Filename to Save to)

File name to be saved can be specified.
Auto setting
The document name is set to be [img-"date time"] automatically.
Setting a file name
1
Select [Document Name].
2
Enter a filename using the keyboard shown. Up to 28 characters can be entered.
For information about entering text, refer to "Entering Text" (P.296).
Note • When specifying a Job Template, the filename is taken from the template, and cannot be
changed.
Output Format
4
165