Transfer Protocol; Shared Name (Smb Only) - Fuji Xerox ApeosPort-III C2201 Administrator's Manual

Name
Enter a recipient name with not more than 18 characters.
For information about how to enter characters, refer to "Entering Text" (P.27).
Custom Item 1 (ApeosPort Series Models Only)
The attribute name set as [Custom Item 1 attribute name] is shown as the item name.
You can input any information as an auxiliary item. Up to 20 characters can be used. This
item is appropriate for information represented by a shorter character string, such as
telephone number, employee number.
For more information on the attribute name, refer to "Attribute Name of Custom Item 1, 2, and 3"
(P.170).
Custom Item 2 (ApeosPort Series Models Only)
The attribute name set as [Custom Item 2 attribute name] is shown as the item name.
You can input any information as an auxiliary item. Up to 40 characters can be used. This
item is appropriate for information represented by a longer character string, such as company
name, department.
For more information on the attribute name, refer to "Attribute Name of Custom Item 1, 2, and 3"
(P.170).
Custom Item 3 (ApeosPort Series Models Only)
The attribute name set as [Custom Item 3 attribute name] is shown as the item name.
You can input any information as an auxiliary item. Up to 60 characters can be used. This
item is appropriate for information represented by a longer character string, such as company
division, company address.
For more information on the attribute name, refer to "Attribute Name of Custom Item 1, 2, and 3"
(P.170).
S/MIME Certificate (ApeosPort Series Models Only)
Allows you to make a link with a S/MIME certificate. The S/MIME certificate needs to be
registered in advance.
In order to link a certificate, select a certificate in a screen displayed when selecting [Create/
Change Link]. To delete a link, select [Cut Link].
Important • If a linked certificate is deleted due to some reason such as hard disk initialization, the
certificate is delinked from the S/MIME certificate on Address Book. When re-registering the
S/MIME certificate, you need to manually link it again.
Note • If many certificates are registered in the machine, it may take a long time to link a certificate.
For information on the certificate, refer to "Encryption and Digital Signature Settings" (P.313).

Transfer Protocol

Set the forwarding destination protocol. You can select from [FTP] and [SMB].
Server Name/IP address
Enter a name or IP address of a forwarding destination server.

Shared Name (SMB Only)

Enter the shared name set for the SMB folder.
Important • If the "/" mark is used at the top of a shared name, a job flow cannot read the shared name
correctly. Do not use the "/" mark at the top of a shared name.
Save In
Enter the directory for storing documents. When SMB is selected, use a UNC format.
Forwarding via FTP
Setup
5
223