11.6.7
Bypass paper sensor (S40)
(1)
Take off the bypass feed upper cover.
P.11-17 "11.6.4 Bypass feed upper cover"
(2)
Remove 4 screws and take off the upper
plate.
(3)
Take off the sensor arm.
(4)
Disconnect the connector from the sensor
and release the latch to take off the bypass
paper sensor.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Upper plate
Fig. 11-24
Fig. 11-25
Fig. 11-26
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
11 - 19
Sensor arm
Bypass paper sensor
PAPER FEEDING SYSTEM
11