Exit Unit - Toshiba e-STUDIO2330C Service Manual

(3) Loosen 2 screws and take off the exit unit.
16.6.18 Upper exit roller / Lower exit roller
(1) Take off the exit unit.
 P.16-39 "16.6.17 Exit unit"
(2) Remove 2 screws.
(3) Remove the exit flame from the exit duct
base.
Note:
When installing the exit flame, hook the
flame of the exit flame onto the 2 hooks of
the exit duct base.
(4) Remove 2 screws and take off the 2 leaf
springs.
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
FUSER UNIT / PAPER EXIT SECTION
Exit frame
Exit duct base
Leaf spring
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
16 - 40

Exit unit

Fig. 16-72
Hook
Fig. 16-73
Exit frame
Fig. 16-74