Bypass Feed Upper Cover - Toshiba e-STUDIO2330C Service Manual

Note:
Install the bracket so that its pointer is placed
at the same position as before.
(4) Disconnect 1 connector, remove 1 screw and
take off the SFB board.
11.6.4

Bypass feed upper cover

(1) Take off the bypass unit.
 P.11-14 "11.6.1 Bypass unit"
(2) Remove 1 screw and slide the bypass feed
upper cover to take it off.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 11-18
Fig. 11-19
Fig. 11-20
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
11 - 17
Pointer
SFB board
Bypass feed upper cover
PAPER FEEDING SYSTEM
11