Bypass Copying On Standard Size Paper - Toshiba e-Studio 281c Operator's Manual

3.Bypass Copying (Cont.)

Bypass copying on standard size paper

Copying on A3, A4, B4 and B5 size paper
Place some sheets of paper with their
1
copy side down on the bypass tray. Align
2
the side guides to the paper length while
holding A.
• The message "Ready for bypass feeding" appears.
• Rear side of the side guides of the bypass tray has an indicator
for paper height. The height of the sheets must not exceed this
indicator.
• When you use more than one sheet, fan the sheets well before
setting them on the tray.
• Do not push the sheets into the entrance of the bypass feeder;
this may cause a paper jam.
When the paper size is larger, draw out the three-stage paper
holder. Raise B when you use A3 or a larger size of paper.
Place the original(s).
2
Press the button of the same size as the one of the paper you have set
3
on the tray.
• If the paper size is not specified here, some operations such as cleaning may slow down the copying.
72
2.HOW TO MAKE COPIES
A
B