Construction - Toshiba e-STUDIO2330C Service Manual

7.2

Construction

Scanner
Original glass Original glass
RADF original glass
Carriage-1 Exposure lamp (EXP)
Inverter board (INV)
Reflector
Mirror-1
Carriage-2 Mirror-2
Mirror-3
Lens unit
CCD driving PC
board (CCD)
Automatic original
detection sensor
(S1-5)
Driving section Scan motor (M1)
Other Scanning section control PC board (SLG)
Carriage home position sensor (S6)
Platen sensor (S7)
Main switch (SW1)
Rubber damper
Scanner unit cooling fan (M30)
Exposure lamp cooling fan (M32)
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
SCANNER
Xenon lamp (26 W)
• 2-phase stepping motor
• Wire drive
• Driving the carriage-1 and carriage-2
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
7 - 2