Process Cover - Toshiba e-STUDIO2330C Service Manual

12.6.2

Process cover

(1) Take off the process unit (EPU).
 P.12-12 "12.6.1 Process unit (EPU)"
(2) Take off the main charger cleaner handle.
(3) Release 2 latches, and then take off the
connector cover.
(4) Disconnect the connector.
Notes:
• Be sure to place the process unit (EPU) in
the correct position as shown in Figure to
avoid the damage on the drum.
• When installing, be sure not to have
harnesses being loosened.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Main charger cleaner handle
Fig. 12-12
Ratch
Fig. 12-13
Connector
Fig. 12-14
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
12 - 13
Connector cover
PROCESS UNIT RELATED SECTION
12