Procedure For Disabling Data Encryption Function - Toshiba e-STUDIO2330C Service Manual

[I] Check actuation of data encryption function setting
Check if the data encryption function is in operation.
• Press the [USER FUNCTION] button on the control panel. If a key-shaped icon is displayed at the
top right of the screen, the data encryption function is in operation.
22.2.4

Procedure for disabling data encryption function

The basic procedure is the same as the one for enabling this function. To disable it, set "0 (Invalid)" in
the code 08-9379 at step  P.22-13 "[D] Enable data encryption function".
22.2.5 Procedure for discarding HDD when data encryption function is
enabled
Set the data encryption function disabled following the procedure shown in  P.22-16 "22.2.4
Procedure for disabling data encryption function". Then perform the code 08-1426 (Forcible HDD data
clearing) to completely erase the data in the HDD.
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
BACKUP FUNCTION
Fig. 22-14
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
22 - 16