Toshiba e-STUDIO2330C Service Manual page 233

Hide thumbs Also See for e-STUDIO2330C:

Table of Contents

6. Reflecting mirrors

These reflecting mirrors reflect and lead the laser beams scanned by the polygonal mirror and

corrected by the fθ lenses to the drum. The laser beams of Y, M, C and K colors are directed to the

drum by respectively different routes using one mirror for Y color beam and three each for M, C and

K color beams.

Reflecting mirror

7. Mirror motor (M14, M15, M16)

At each of the third reflecting mirrors for M, C and K color laser beams, a mirror motor is installed to

make tilt adjustment for the mirror. The parallel correction for the four scanning lines is performed by

adjusting the tilt of mirrors in the following manner:

a. A test pattern is written on the transfer belt. This is read by the Image position aligning sensors

(S16, S17) to recognize the error in scanning lines.

b. With the Y color scanning line as a standard, a mirror motor installed at each of the M, C and K

color beam mirrors is driven to adjust the degree of laser beam parallelization by inclining the mirror.

e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C

LASER OPTICAL UNIT

Reflecting mirror

Polygonal mirror

Show Quick Links

Chapters

Table of Contents