Initialization At Power-On - Toshiba e-STUDIO2330C Service Manual

7.4.2

Initialization at power-ON

The carriage moves to its home position and performs the peak detection.
Then it moves to the carriage waiting position and waits.
Power ON
Carriage home
position sensor
ON
Scan motor rotating
(Moves to the forward
direction of carriage)
Carriage home
position sensor
NO
OFF
YES
Carriage home position
data set
Deceleration
Meet conditions?
YES
Pre-scanning
Moving peak detection
position
Peak detection
Completion of
initialization
Moving carriage
waiting position
Scanning command
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
SCANNER
NO
YES
(Moves to the backward
Stop
NO
Fig. 7-7
Scan motor rotating
direction of carriage)
Carriage home
position sensor
NO
ON
YES
Deceleration Stop
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
7 - 6
Error handling