14.6.11 2nd transfer unit (TRU)
(1)
Move the automatic duplexing unit to its
maintenance position.
P.17-13 "17.7.1 ADU maintenance
position"
(2)
Take off the right front hinge cover.
P.3-31 "3.5.14 Right front hinge cover"
(3)
Remove 1 screw and take off the connector
cover.
(4)
Disconnect 1 connector, and then remove 2
clamps.
(5)
Remove 1 screw, and then take off the 2nd
transfer unit hinge stay.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 14-43
Connector
Clamp
Fig. 14-44
2nd transfer unit hinge stay
Fig. 14-45
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
14 - 25
Connector cover
TRANSFER UNIT
14