Engine Rom - Toshiba e-STUDIO2330C Service Manual

20.2.3

Engine ROM

The firmware of the engine ROM can be updated individually by using PWA-DWNLD-350-JIG2.
Important:
• Be sure to unplug the power cable before installing and removing the download jig.
• Do not shut down the equipment during the update. The data could be damaged and not be
able to be operated properly.
• When servicing the equipment with the power cable plugged in, be sure not to touch live
sections or motors, etc.
[A] Update Procedure
(1) Write the ROM data to be updated to the download jig (PWA-DWNLD-350-JIG2).
(2) Turn the power OFF using the main power switch on the right-hand surface of the equipment.
(3) Unplug the power cable from the outlet.
(4) Take off the rear cover-1.
(5) Remove the cover plate.
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
FIRMWARE UPDATING
Rear cover-1
Fig. 20-11
Cover plate
Fig. 20-12
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
20 - 28