Drum Drive Unit - Toshiba e-STUDIO2330C Service Manual

12.6.13 Drum drive unit

(1) Take off the ozone exhaust duct.
 P.13-34 "13.5.23 Ozone exhaust duct"
(2) Remove 1 screw on the right side of the
drum drive unit.
(3) Open the board case.
 P.21-10 "21.1.11 Board case"
(4) Release the harness from the 3 harness
clamps.
(5) Disconnect the 1 connector and 2 relay
connectors.
(6) Remove 3 screws and take off the drum
drive unit.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Drum drive unit
Fig. 12-39
Relay connector
Fig. 12-40
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
12 - 23
Connector
Drum drive unit
PROCESS UNIT RELATED SECTION
12