Toshiba e-STUDIO2330C Service Manual page 99

[F] Waste toner box replacement
• Waste toner box is full of used toner

Waste toner box full detection sensor (S13) ON

"Dispose of used toner" is displayed
• Waste toner box full detection sensor (S13) is turned ON during printing

Printing is stopped after the paper being printed is exited
Solution: Replace the waste toner box with new one and close the waste toner cover.
[G] Call for service
Check the error code displayed on the control panel when "Call for service" appears, and handle the
abnormality in reference to the error code table.
 P.26-2 "26.2 Error Code List"
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
5 - 15
GENERAL OPERATION
5