Toshiba e-STUDIO2330C Service Manual page 878

Classific
Code
ation
1774 General Card reader format
information -2
1775 General Card reader format
information -3
1776 General Card authentication LDAP
server
1778 General Period for locking the
control panel when an
incorrect administrator
password has been
entered 3 consecutive
times
1779 Network Default data saving
directory of "Scan to File"
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
SETTING MODE (08)
Setting mode (08)
Functi
Items
on
ALL
ALL
ALL
ALL
ALL
25 - 142
Default
<Accept
RAM Contents
able
value>
- SYS The data of the block
number in the
noncontact IC is set.
KP-2003: <PPQRSSTU
(hexadecimal number)>
PP:1st block
Q: 1st block beginning
byte
R: 1st block
endingbyte
SS:2nd block
T: 2nd block beginning
byte
U: 2nd block ending
byte
KP-2005: <RRBSEbse
(hexadecimal number)>
RR:00 (Fixed)
B: 1st area block
number
S: 1st area beginning
byte offset
E: 1st area ending byte
offset
b: 2nd area block
number
s: 2nd area beginning
byte offset
e: 2nd area ending
byte offset
* If the 2nd block/area is
not used, set the SSTU
to "FFFF" (hexadecimal
number), the bse to
"FFF" (hexadecimal
number).
- SYS Security key
"KKKKKKKKKKKK" (12
digits) <hexadecimal
number> in the [Key
Information] of the
[Sector Number] set in
the code 08-1773
should be entered.
0 SYS LDAP server number
<0-100> for the card
authentication when a
noncontact IC card is
used should be set.
1 SYS 0: 0 min.
<0-7> 1: 0.5 min. (30 sec.)
2: 1 min.
3: 3 min.
4: 5 min.
5: 10 min.
6: 15 min.
7: 30 min.
0 SYS 0: Local directory
<0-2> 1: REMOTE 1
2: REMOTE 2
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Proce
dure
1
1
1
1
1