Cloning Procedure - Toshiba e-STUDIO2330C Service Manual

22.1.4

Cloning procedure

[A] Backup procedure
(1) Shut down the equipment.
(2) Connect the USB media to the USB port on the right upper cover.
Note:
Backing up cannot be performed with multiple USB media connected at the same time.
(3) Turn the power ON while pressing the [5] and [9] buttons simultaneously.
A screen for selecting items to back up is displayed. Select the number (any of "1", "3" and "5")
for data you want to back up. Press the [Start] button.
Number
1: User Data Back Up
3: Setting Back Up
5: SRAM Data Back Up
Note:
The screen above is not displayed if the data cloning function is disabled.In this case, ask the
user (machine administrator) to enable the data cloning function on the TopAccess menu.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
USB port
USB media
Fig. 22-2
Backup Item
Backing up User data
Backing up Setting item
Backing up SRAM data
Fig. 22-3
22 - 3
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
BACKUP FUNCTION
22