Toshiba e-STUDIO2330C Service Manual page 144

[B] Installation of lens unit
(1) Attach the lens unit and fix it temporarily with
2 screws.
(2) Match the center scale of the plate in which
the unit is to be installed and the rightmost
scale of the adjusting hole on the lens unit
plate.
(3) Tighten 4 screws securely to fix the lens unit
while pushing it to the rear side.
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
SCANNER
Screw
[ Rear ]
Screw
Screw
[ Front ]
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
7 - 20
[ Rear ]
[ Front ]
Fig. 7-31
Fig. 7-32