Toshiba e-STUDIO2330C Service Manual page 629

[G] Reset "FUNCTION LIST FOR MAINTENANCE"
(1) Print out the "FUNCTION LIST FOR MAINTENANCE" list after the formatting.
 P.22-12 "[B] Print out "FUNCTION LIST FOR MAINTENANCE""
(2) While pressing [1] and [3] simultaneously, turn the power ON. (Function Mode)
(3) Compare the lists which were printed before and after the formatting to check the setting items
having the different setting values. Set the value which was set before the formatting
Turn the power OFF.
(4) Turn the power OFF.
[H] Reset "FUNCTION" list
• Reset the fax function by referring to the "function list" that was printed out in Ch.22.2.3 [C] Print out
"function list".
(1) Press the [USER FUNCTIONS] button.
(2) Press the [ADMIN] button, enter the password, and then press the [ENTER] button.
(3) Press the [FAX] button and then the [TERMINAL ID] button to set each item.
(4) Press the [INITIAL SETUP] button to set each item.
Note:
Explain to the user (machine administrator) about the next operation and ask him/her to enter
his/her password.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
22 - 15
BACKUP FUNCTION
22