Density Adjustment - Toshiba e-STUDIO2330C Service Manual

8.8.2

Density adjustment

Adjusts the center density and the variation of density adjustment buttons.
Original mode
Color
Mode
Text Photo
Color 8340 8341
8344 8345
8348 8349
Black
Original mode
Text/
Text Photo
Photo
845 846 847
860 861 862
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Key in a code and press the [START] button.
(3) Key in an adjustment value (acceptable values: 0 to 255).
(To correct a value once keyed in, press the [CLEAR] button.)
Press the [ENTER] or [INTERRUPT] button to store the value in memory.  The equipment goes
(4)
back to the ready state.
(5) Let the equipment restart and perform the scanning.
(6) If the desired image quality has not been attained, repeat step (1) to (5).
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Item to be
Printed User
adjusted
image custom
8342 8380 Manual density
center value
8346 8381 Manual density
light step value
8350 8382 Manual density
dark step value
Gray Item to be
Scale adjusted
User
custom
7475 848 Manual density
center value
7478 863 Automatic density
8 - 63
<Adjustment Mode (05)>
Remarks
The larger the value is, the darker the image
becomes.
Acceptable values: 0 to 255 (Default: 128)
Sets the changing amount by 1 step at the
density adjustment on the control panel.
The larger the value is, the lighter the light
side becomes.
Acceptable values: 0 to 255 (Default: 20)
Sets the changing amount by 1 step at the
density adjustment on the control panel.
The larger the value is, the darker the dark
side becomes.
Acceptable values: 0 to 255 (Default: 20)
<Adjustment Mode (05)>
Remarks
The larger the value is, the darker the image
becomes.
Acceptable values: 0 to 255
(Default: 128)
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
IMAGE PROCESSING
8