Waste Toner Paddle Motor (M6) - Toshiba e-STUDIO2330C Service Manual

13.5.12 Waste toner paddle motor (M6)

(1) Take off the waste toner box.
 P.13-12 "13.5.1 Waste toner box"
(2) Take off the left lower cover.
 P.3-29 "3.5.8 Left lower cover"
(3) Remove 6 screws, and take off the plate.
(4) Disconnect 1 connector and remove 3
screws. Then take off the waste toner paddle
motor drive unit.
(5) Disconnect 1 connector and remove 2
screws. Then take off the waste toner paddle
motor.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 13-51
Waste toner paddle motor drive unit
Fig. 13-52
Fig. 13-53
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
13 - 27
Plate
Waste toner paddle motor
DEVELOPER UNIT
13