Board Cover - Toshiba e-STUDIO2330C Service Manual

(5) Remove 4 screws and take off the hard disk.
(6) Remove 1 screw each and the 2 ground
wires.
21.1.2

Board cover

(1) Take off the rear cover-2.
 P.3-33 "3.5.19 Rear cover-2"
(2) Remove 1 screw and loosen 11 screws.
(3) Slide the board cover to take it off.
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
REPLACEMENT OF PC BOARDS/HDD
Hard disk
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
21 - 2
Ground wire
Fig. 21-3
Fig. 21-4
Board cover
Fig. 21-5