Registration Roller (Metal) - Toshiba e-STUDIO2330C Service Manual

(4) Remove 1 screw, 3 gears and the bracket
with gear.
Note:
Replace the registration motor with the
damper and the bracket installed.
Note:
Never attempt to loosen 4 screws with lock
paint.

11.6.35 Registration roller (Metal)

(1) Take off the registration motor unit.
 P.11-36 "11.6.33 Registration motor unit"
(2) Take off the registration guide.
 P.11-32 "11.6.29 Registration guide"
(3) Take off the middle guide.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Registration motor
Fig. 11-76
Screw
Fig. 11-77
Fig. 11-78
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
11 - 37
Screw
Screw
Middle guide
PAPER FEEDING SYSTEM
11