Dell Networking 2024 Reference Manual page 108

Command
link-dependency group
add
depends-on
show link-dependency
a. For the meaning of each Mode abbreviation, see
LLDP
Command
clear lldp remote-data
clear lldp statistics
lldp med
lldp med confignotification
lldp med
faststartrepeatcount
lldp med transmit-tlv
lldp notification
lldp notification-interval
lldp receive
lldp timers
lldp transmit
lldp transmit-mgmt
Description
Enters the link-dependency mode to configure
a link-dependency group.
Adds member gigabit Ethernet port(s) to the
dependency list.
Adds the dependent Ethernet ports or port
channels list.
Shows the link dependencies configured on a
particular group.
Mode Types
Description
Deletes all data from the remote data table.
Resets all LLDP statistics.
Enables/disables LLDP-MED on an interface.
Enables sending the topology change
notification.
Sets the value of the fast start repeat count.
Specifies which optional TLVs in the LLDP
MED set are transmitted in the LLDPDUs.
Enables remote data change notifications.
Limits how frequently remote data change
notifications are sent.
Enables the LLDP receive capability.
Sets the timing parameters for local data
transmission on ports enabled for LLDP.
Enables the LLDP advertise capability.
Specifies that transmission of the local system
management address information in the
LLDPDUs is included.
on page 87.
Command Groups
a
Mode
GC
LD
LD
PE
a
Mode
PE
PE
IC
IC
GC
IC
IC
GC
IC
GC
IC
IC
108