Dell Networking 2024 Reference Manual page 104

Hide thumbs Also See for Networking 2024:
Table of Contents

Advertisement

IP Addressing
Command
clear host
clear ip address-conflict-
detect
ip address (Out-of-Band)
ip address-conflict-detect
run
ip address dhcp (Interface
Configuration)
ip default-gateway
ip domain-lookup
ip domain-name
ip host
ip name-server
ipv6 address (Interface
Configuration)
ipv6 address (OOB Port)
ipv6 address dhcp
ipv6 enable (Interface
Configuration)
ipv6 enable (OOB
Configuration)
ipv6 gateway (OOB
Configuration)
Description
Deletes entries from the host name-to-address
cache.
Clears the address conflict detection status in
the switch.
Sets an IP address for the out-of-band interface. IC
Triggers the switch to run active address conflict
detection by sending gratuitous ARP packets for
IPv4 addresses on the switch.
Acquires an IP address on an interface from the
DHCP server.
Defines a default gateway (router).
Enables IP DNS-based host name-to-address
translation.
Defines a default domain name to complete
unqualified host names.
Configures static host name-to-address
mapping in the host cache.
Configures available name servers.
Sets the IPv6 address of the management
interface.
Sets the IPv6 prefix on the out-of-band port.
Enables the DHCPv6 client on an IPv6
interface.
Enables IPv6 on the management interface.
Enables IPv6 operation on the out-of-band
interface.
Configures the address of the IPv6 gateway.
Command Groups
a
Mode
PE
PE
GC
IC
GC
GC
GC
GC
GC
IC
IC
IC
GC
IC
IC
104

Advertisement

Table of Contents
loading

Table of Contents