Dell Networking 2024 Reference Manual page 110

Command
peer-keepalive destination
peer-keepalive enable
role priority
show vpc
show vpc brief
show vpc consistency-
parameters
show vpc consistency-
features
show vpc peer-keepalive
show vpc role
show vpc statistics
vpc
vpc domain
vpc peer-link
a. For the meaning of each Mode abbreviation, see
Description
Enables the Dual Control Plane Detection
Protocol with the configured IP address of
the peer MLAG, the local source address and
the peer timeout value.
Enables the peer keep-alive protocol.
Configures the priority value used on a
switch for primary/secondary role selection.
Displays information about an MLAG.
Displays the MLAG global status.
Displays MLAG-related configuration
information in a format suitable for
comparison with the other MLAG peer.
Displays MLAG-related configuration
information in a format suitable for
comparison with the other MLAG peer.
Displays the peer MLAG switch's IP address
used by the dual control plane detection
protocol.
Displays information about the keepalive
status, keepalive parameters, role of the
MLAG switch, and the system MAC and
priority.
Displays counters for the keepalive messages
transmitted and received by the MLAG
switch
Configures a port-channel (LAG) as part of
the MLAG domain.
Enters into MLAG Configuration mode.
Configures a port channel as the MLAG peer
link for a domain and enables the peer link
protocol.
Mode Types on page 87.
Command Groups
a
Mode
MD
MD
MD
PE
PE
PE
PE
PE
PE
PE
IC
GC
IC
110