Printer Control Board (Prcb) - Konica Minolta bizhub C35 Service Manual

DRAFT
7. OTHER MAINTENANCE ITEM
7.4.15

Printer control board (PRCB)

1. Remove the rear cover.
See P.44
2. Remove the left cover.
See P.45
3. Remove the hard disk.
See P.55
[1]
[1] [2]
[1]
62
[1] [1]
[2] [1]
A121F2C023DA
[1]
[1]
A121F2C027DA
A121F2C028DA
Field Service Ver. 1.0 Feb. 2010
4. Remove seventeen screws [1], and
remove the board protective shield
[2].
5. Disconnect all connectors and flat
cables.
6. Remove eight screws [1], and
remove the printer control board [2].
NOTE
• When the printer control board
(PRCB) has been replaced, be sure
to remount EEPROM (ICS1) [1].
Unmount EEPROM (ICS1) [1] from
the old printer control board and
mount it on the new printer control
board.