7. OTHER MAINTENANCE ITEM
7.3.11
DC power supply (DCPU)
• Note that in the event of DC power supply failure, it can take long before
voltage drops even after turning OFF the power switch.
To avoid electrical shock, after turning OFF the power switch, do not
touch the DC power supply for 7 minutes.
1. Remove the fuser unit.
See P.17
2. Remove the exit cover.
See P.43
3. Remove the left cover.
See P.42
4. Remove the rear right cover.
See P.42
5. Remove the operation panel.
See P.44
6. Remove the upper cover.
See P.44
7. Remove the cooling fan motor.
See P.61
[1]
[3]
50
CAUTION
[2]
[3]
A0VDF2C021DA
Field Service Ver. 1.0 May 2010
8. Remove the screw [1], and remove
the exit drive assy [2].
9. Disconnect two connector [3].