Table of Contents
Advertisement
7. OTHER MAINTENANCE ITEM
7.4.16
DC power supply (DCPU)
• Note that in the event of DC power supply failure, it can take long before
voltage drops even after turning OFF the power switch.
To avoid electrical shock, after turning OFF the power switch, do not
touch the DC power supply for 9 minutes.
1. Remove the fuser unit.
See P.20
2. Remove the high voltage unit.
See P.66
3. Remove the ADF.
See P.47
4. Remove the scanner unit.
See P.52
5. Remove the operation panel.
See P.46
6. Remove the cooling fan motor.
See P.72
[1]
[2]
[3]
[2]
64
CAUTION
7. Remove seven screws [1], and
[1]
A121F2C048DA
8. Remove the screw [1], and remove
9. Disconnect three connectors [3].
[3]
[1]
A121F2C029DA
Field Service Ver. 1.0 May 2010
remove the upper cover [2].
the exit drive assy [2].
Advertisement
Table of Contents
