Show Nmsp - Cisco Catalyst 3560X-24P Command Reference Manual

show nmsp

show nmsp
Use the show nmsp privileged EXEC command to display the Network Mobility Services Protocol
(NMSP) information for the switch.
Syntax Description attachment suppress
interface
capability
notification interval
statistics {connection |
summary}
status
subscription {detail |
summary}
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.2(53)SE2
Catalyst 3750-X and 3560-X Switch Command Reference
2-728
show nmsp {attachment suppress interface | capability | notification interval | statistics
{connection | summary} | status | subscription {detail | summary}} [ | {begin | exclude |
include} expression]
Display attachment suppress interfaces.
Display switch capabilities including the supported services and
subservices.
Display the notification intervals of the supported services.
Display the NMSP statistics information.
•
•
Display information about the NMSP connections.
Display the subscription information on each NMSP connection.
•
•
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
connection—display the message counters on each connection.
summary—display the global counters.
detail—display all services and subservices subscribed on each
connection.
summary—display all services subscribed on each connection.
OL-21522-02