Show Nmsp - Cisco Catalyst 3750-X Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

show nmsp

Use the show nmsp privileged EXEC command to display the Network Mobility Services Protocol
(NMSP) information for the switch.
Syntax Description attachment suppress
interface
capability
notification interval
statistics {connection |
summary}
status
subscription {detail |
summary}
Command Modes Privileged EXEC
Command History Release
12.2(53)SE2
Examples This is an example of output from the show nmsp attachment suppress interface command:
Switch# show nmsp attachment suppress interface
NMSP Attachment Suppression Interfaces
--------------------------------------
GigabitEthernet1/1
GigabitEthernet1/2
This is an example of output from the show nmsp capability command:
Switch# show nmsp capability
NMSP Switch Capability
------------------------------
Service
-----------
Attachment
Location
OL-29704-01
show nmsp {attachment suppress interface | capability | notification interval | statistics
{connection | summary} | status | subscription {detail | summary}}
Display attachment suppress interfaces.
Display switch capabilities including the supported services and
subservices.
Display the notification intervals of the supported services.
Display the NMSP statistics information.
•
•
Display information about the NMSP connections.
Display the subscription information on each NMSP connection.
•
•
Modification
This command was introduced.
Subservice
--------------
Wired Station
Subscription
connection—display the message counters on each connection.
summary—display the global counters.
detail—display all services and subservices subscribed on each
connection.
summary—display all services subscribed on each connection.
Catalyst 3750-X and 3560-X Switch Command Reference
show nmsp
2-777