Show Ports Monitor - Cisco Small Business 300 1.1 Series Administration Manual

Port Monitor Commands
78-20269-01 Command Line Interface Reference Guide
3. Mirrored traffic is exposed to STP state, i.e. if the port is in STP blocking, it will
not egress any mirrored traffic.
Example
The following example copies traffic for both directions (Tx and Rx) from the
source port 2 to destination port
gi1/1/
Console(config)#
interface gi1/1/1
Console(config-if)# port monitor gi1/1/2
28.2

show ports monitor

Use the show ports monitor EXEC mode command to display the port monitoring
status.
Syntax
show ports monitor
Command Mode
EXEC mode
Example
The following example displays the port monitoring status.
Console# show ports monitor
Source port Destination Port
----------- ----------------
gi1/1/8 gi1/1/1
gi1/1/2 gi1/1/1
gi1/1/18 gi1/1/1
VLAN 9 gi1/1/1
1.
gi1/1/
Type Status
-------- --------
RX,TX Active
RX,TX Active
Rx Active
N/A Active
28
362