Enable Password - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

3.9 enable password

This command modifies enable password parameters and the no form of the command disables
enable password parameters.
enable password [level (1-15)] <LINE 'enable' password>
no enable password [level (1-15)]
Syntax Description
Level - Privilege Level
Mode
Global Configuration Mode
The enable password command is used to set the password for a particular privilege
Level.
When this command is configured, the switch prompts for the password, whenever user
wants to move from lower privilege level to higher privilege level using enable command
Related Command
username - Creates a user and sets the enable password for that user with the privilege level
Release : 1.1f 46 / 985