Super Micro Intelligent Switch Command Line Interface User Guide
15.17
switchport trunk native vlan
This command configures the trunk native vlan for the port. The no form of this command resets
the trunk native vlan to the default management vlan 1.
switchport trunk native vlan <vlan-id(1-4069)>
no switchport trunk native vlan
Mode
Interface Configuration Mode
Defaults
Vlan 1
Example
SMIS(config-if)# switchport trunk native vlan 3
Related Command
show vlan port config - Displays the VLAN related parameters specific for ports
Release : 1.1f
355 / 985