Group Restricted - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide
15.27

group restricted

This command enables or disables restricted group registration on a port.
group restricted {enable | disable }
Syntax Description
enable - Enables restricted group registration
Disable - Disables restricted group registration
Mode
Interface Configuration Mode
Defaults
disable
Example
SMIS(config-if)# group restricted enable
If restricted group registration rules are enabled, then a multicast group attribute/service
requirement attribute is learnt dynamically from the GMRP frame only if the specific
multicast group attribute/service requirement attribute is statically configured in the
switch. If restricted group registration rules are disabled, then GMRP packets are
processed normally and the multicast group attribute/service requirement attribute are
learnt dynamically even if they are not statically configured in the switch.
Related Command
show vlan port config - Displays the VLAN related parameters specific for ports
Release : 1.1f 365 / 985