Debug Dot1X - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide
10.15

debug dot1x

This command enables debugging of dot1x module and the no form of the command disables
debugging of dot1x module.
debug dot1x {all | errors | events | packets | state-machine |
redundancy}
no debug dot1x {all | errors | events | packets | state-machine |
redundancy}
Syntax Description
all - All dot1x debug messages
errors - dot1x error code debug messages
events - dot1x event debug messages
packets - dot1x packet debug messages
state-machine - State-machine related-event debug messages
redundancy - Redundancy related debug messages
Mode
Privileged EXEC Mode
Defaults
Events Debugging is enabled
Example
SMIS# debug dot1x all
A four byte integer is used for enabling the level of tracing. Each BIT in the four byte
integer, represents a particular level of Trace.
Related Command
show dot1x - Displays dot1x information
Release : 1.1f 262 / 985